Transient creep during transformation in Cd-Zn alloys

Transient creep of Cd-2 wt. % Zn and Cd-17·4 wt. % Zn alloys has been studied under different constant stresses ranging from 6·4 MPa to 12·7 MPa near the transformation temperature. The results of both compositions showed two transient deformation regions, the low temperature region (below 483 K) and the high temperature region (above 483 K). From the transient creep described by the equation _tr=Bt ⁿ, where _tr andt are the transient creep strain and time. The parametersB andn were calculated. The parameterB was found to change with the applied stress from 0·3×10^–4 to 3×10^–4 and from 0·6×10^–4 to 18×10^–4 for Cd-2 wt. % Zn and Cd-17·4 wt. % Zn, respectively. The exponentn was found to change from 0·8 to 0·95 for both alloys. The parameterB was related to the steady state creep rate through the equation , the exponent was found to be 0·5 for Cd-2 wt. % Zn and 0·6 for the eutectic composition. The activation energies of transient creep in the vicinity of the transformation regions (above 483 K) were found to be 50·2 kJ/mole for Cd-2 wt. % Zn and 104·7 kJ/mole for the eutectic composition characterizing the mechanisms of grain boundary diffusion and volume diffusion in Cd, respectively.     

Study of the dehydration of Portland Cement by Mössbauer spectrometry

Egyptian Portland Cement in the form of one inch cube was hydrated at different times of hydration. Nine cubes of each period of hydration were heated for five minutes 200, 300, 400 up to 1000°C then were quenched in air. The compressive strength was measured for these samples and related to unheated ones. These cubes were ground and measured by Mössbauer spectrometry to correlate the effect of dehydration of cement pastes on the states of iron, with the decrease of compressive strength. It was observed that starting from 400°C the central doublet characteristic of the hydration process decreased as the dehydration temperature was increased. At 1000°C the dehydration process was complete, the central doublet disappeared and the compressive strength vanished. The hydration process was found to be reversible. The application of Mössbauer spectrometry to estimate the degree of fire in concrete building was demonstrated.     

Spectrofluorimetric determination of guanethidine sulphate,guanfacine hydrochloride,guanoclor sulphate and guanoxan sulphate in tablets and biological fluids,using benzoin

A sensitive and rapid Spectrofluorimetric method for the determination of guanethidine sulphate, guanfacine hydrochloride, guanoclor sulphate and guanoxan sulphate in tablets and spiked human serum and urine samples is described. The method is based on the reaction of monosubstituted guanidino compounds in an aqueous potassium hydroxide solution with benzoin, in the presence of -mercaptoethanol and sodium sulphite. Highly fluorescent derivatives were obtained, with excitation and emission maximum wavelengths around 325 and 430 nm, respectively. In optimal reaction conditions, the linearity ranges were 0.04–0.28 g/ml, with relative standard deviations less than 2%. The method has been successfully applied to the determination of these drugs in tablets. The results are highly correlated with the B.P. method. Chloroform (or for guanoxan dichloromethane) was used to extract the drugs from serum and urine at basic pH, followed by the proposed fluorimetric method. The limit of detection is 0.02 g/ml for the selected drugs.     

Ungewöhnliche Bildung und Struktur eines O‐Sulfinato‐Zinkkomplexes

Unusual Formation and Structure of a O‐Sulfinato Zinc Complex Whereas the reaction between hydrotris[(N‐xylyl)‐thioimidazolyl]borato‐zinc perchlorate ([ L· Zn‐OClO₃]) and ethanethiolate under an inert atmosphere leads to the thiolate complex [ L· Zn‐SC₂H₅], the same reaction in air produces the sulfinato complex [ L· Zn‐O‐S(O)‐C₂H₅] ( 1 ). 1 is the first fully characterized sulfinato‐zinc complex. Its structure determination has confirmed the unusual coordination of the sulfinato ligand via one of its oxygen atoms.     

Loganin,loganic acid and periclymenoside,a new biosidic ester iridoid glucoside from Lonicera periclymenumL. (Caprifoliaceae)

Loganin ( 1 ), loganic acid ( 2 ), and periclymenoside ( 3 ) have been isolated from Lonicera periclymenum L . The structure of the new compound 3 and the identity of the others have been determined by chemical transformations and interpretation of the spectral data.     

Solvation numbers and hydration constant for thorium(IV) in ethanol-water medium

The solvation number and hydration constant of Th⁴⁺ in ethanol-water medium were determined at 25°C using UV-spectral and electrochemical measurements. A solvate formation equilibrium is demonstrated and characterized. Three molecules of ethanol (S) can bond to the metal cation with strengths comparable to that for H₂O to form ThS₃(H₂O) ₃ ⁴⁺ Formation of thorium monochelate with lawsone (2-hydroxy-1,4-naphthoquinone) eliminates bonding with alcohol molecules. The dissociation constant of the chelating agent_sK_a and the formation contant of the monochelated metal ion_sK _f ^* that are essentially independent of the solution composition are evaluated. Hydration titrations involving thorium-lawsone monochelate are performed and the data obtained from the changes of pH with solvent composition are analyzed. The solution independent constant,_sK _f ^* for thorium-lawsone complex formation in mixed aqueous ethanol is given by $$log_s K_f * = vpK_a + log_s K_h - log[LH] - vpH + 3logv$$ where vpK_a is the dissociation constant of the chelating agent LH in the solvent system of ν volume fraction of water and_sK_h is the solution-independent hydration constant of thorium (IV) in the solvent system. Log-values for the constants_sK_h,_sK _f ^* and_sK _a ^* are found to be 7.8±0.02, 11.38±0.04 and ?0.753, respectively.     

Recoil spectrometry: Ion accelerator based elemental characterisation of surface layers

Recoil Spectrometry covers a group of techniques that are very similar to the well known Rutherford backscattering Spectrometry technique, but with the important difference that one measures the recoiling target atom rather than the projectile ion. This makes it possible to determine both the identity of the recoil and its depth of origin from its energy and velocity, using a suitable detector system. The incident ion is typically high-energy (30–100MeV)³⁵C1,⁸¹Br or¹²⁷I. Low concentrations of light elements such as C, O and N can be profiled in a heavy matrix such as Fe or GaAs. Here we present an overview of mass and energy dispersive recoil Spectrometry and illustrate its successful use in some typical applications.